My triple play

In my last blog entry I mentioned that I was tackling three projects for the weekend.  I actually finished two on the weekend and the third on Tuesday night.  I had to do a slight modification and buy more paint so that took an extra day or two.

First Project:  Padded top for wire dog crate
We have four dogs.  All very different breeds and very different dog-alities.  (Do dogs have a person-ality? I think not.)  Two of them are crated at night.  They need their own rooms as well as that down time to just be. Fondue has a plastic-type crate and it sits next to the piano.  He is a Jack Russell Terror (no misspelling here, although he is much better since he is on Prozac) so his crate is a small one.  Meshach (no, we don't have a Shadrack or an Abednago, just Meshach) has a large wire crate since he is a Blab (bloodhound lab mix) breed.  His crate is near Fondue's and behind the tall table which serves mainly as Mindy's desk. Oftentimes, Mindy will set shoes, bookbags, papers, and such on Meshach's crate.  Mind you, this is a cage crate with the appealing black metal cage look.  It doesn't happen often, but things have fallen through the wires. I thought an upholstered top would be nice to fasten to his crate. I already had a piece of wood that was a little bigger than the crate.  Then I bought two pieces of foam and some material at Hobby Lobby and headed home.  This was a no brainer.  I simply trimmed the wood to slightly bigger than the crate, glued the foam on top, then wrapped the fabric and stapled it.  Here are a few pictures.

 

I figured it wasn't a piece that will be sat on so I didn't feel I needed thick foam or anything too fancy.  Here are a few pictures of the stapling of the fabric.  Again, nothing fancy in the stapling job or the selection of the material.

   

Here is the final reveal.

So far, so good.  I also hammered in a couple of staples to the underside and attached it with zip ties so the top doesn't float around.

Second Project: Adding a shelf to the linen closet

This one is nothing big so there are no pictures.  My friend gave me a shelf months ago to add to my linen closet.  This weekend I cut two cleats and screwed them to the wall.  Then I measured the existing shelves and cut the new one to the same length and put it in the shelf resting on the cleats.  Nothing exciting but certainly a project that is part of my triple play.  Once I get the linen closet cleaned and organized with the new shelf, I may post a picture.

Third Project: Creating a scarf hanger.

I sort of have a scarf collection.  I have scarves from India, Morocco, England, Kenya, Thailand, as well as from the Bourbonnais and Chicagoland areas.  I think it is a great accessory to have.  I have a few different ways I wear them and have a Youtube video that shows 24 ways to wear a scarf. Some of these are repeated but this is where I get different styles. I would hang my scarves on a hanger folded in half or on some scarf rings that I have accumulated. They take up a lot of room, yet they are colorful and I thought it would be nice to have them out kind of on display.  This was my first inspiration but I didn't like the fact that this was a rusty old wrought iron fence piece that would be displaying my scarves. I don't want them to snag on any rough spots.

So I started to think about a wide ladder and using that as a hanger.  I purchased a piece of wood for the rails and then a couple of dowels.  I measure the space where I would hang it in my bedroom.  Here are some pictures of the construction.

     

And the finished project: a scarf ladder.

These are most of my scarves.  I have one in my closet and two in my laundry room still.

Enjoy!

table saw 101

Last January I bought a used table saw.  There was one posted on a for-sale fb page along with other tools. I actually first bought a rubber mallet from this guy and when we met for the exchange I asked him about the Craftsman Table Saw that he posted.  I told him that I was interested in it and that I had never used one before.  He said it was a good one and that he used it a lot.  It just had to go because he was losing his shop area.  I told him I would email him.  So I went home and talked to my roommate about it.  It was $150 for an item that was about $600 brand new.  I decided this was a deal I couldn't pass up.  I emailed him and arranged for the buy and the delivery.  It was housed in Manteno, I had no truck, nor the amount of muscle needed to go get it. He was nice enough to deliver it to my garage.  He delivered it along with the user's manual and said it needed a new blade.  I was all set.  Remember, this was January so it was cold and I had no desire to learn how to use the saw in the winter.  Anyway, the garage needed a good cleaning so the table saw could have a permanent spot along with our bicycles and cars, among other things.

Summer came and it was time to clean out that garage.  Things sure accumulate quickly in the garage over the winter.  Then with July being as hot as it was, this project was delayed.  I ended up cleaning half of the garage, then waited about a month to do the other half.  Since I don't have a large garage, I needed a moveable base for the table saw to live on.  I bought one at Sears and assembled it regardless of the instructions.  Then I got three people to lift the saw so I could maneuver it to receive the legs in the right spots.  Success!  The base was perfect.  It has two levers that raise it to roll it out for use.  Then it is lowered for secured use.

Now it was time to ask a friend to come over and teach me how to use the saw.  I have a couple of friends that offered to show me the ropes.  Duane used to work at Olivet years ago.  He brings in his little woodworking jobs to show the ladies in the office.  He makes trivets, boxes, lanterns, as well as larger items like a dining room table, dressers, and nightstands.  He brings in pictures of the larger items.  He is proud of his work.  He does a great job.  When he brings in pieces to show them off, I look at them closely and guess the wood that he used, look at the joints and talk about how he made the item.  It is a fun little game :)

Duane came over last Thursday night.  The first order of business was to change the blade.  Then we went through squaring the blade, angling the blade, and then making cuts.  Basic cross cuts and ripping are what we covered.  Really, just the basics.  I showed him the plans for my first big project, a queen sized headboard.  He looked through the plans and recommended poplar as the wood.  He agreed that it is a basic plan that is good to start with.  Oh, I almost forgot...we also talked about safety with the table saw.  I have safety goggles and ear plugs.  I am never to be in a rush when I am using the table saw.  I will always wait for the blade to stop all the way before I reach for the wood.  If I ever get in a hurry, I just need to stop, count my fingers and be thankful for each one of them.  Duane lost half of his pinky finger back in 2008.  You just can't get them back so there is no need to hurry...no matter what!

Here is a picture of my table saw.  I hope to bring you regular blogs of my DIY projects.  This
weekend I made a cushioned top for a dog crate, I added a shelf to my linen closet, and I made a scarf hanger.  My next blog will be the detail of those as well as the before and after pictures.  

Enjoy!  

Switched

Since I am a single mother of two kids, I am frugal when it comes to home repair.  Projects that I have done in my house include but are not limited to the following:

1.   Change the kitchen faucet to a cool one that pulls out and sprays.

2.    Paint (a lot).

3.    Pull up carpet, pad, and tack strip (saving $300).

4.    Strip wallpaper.

5.    Cut and install wood base.

6.    Lay 18” ceramic tile, grout too.

7.    Install bead board and chair rail.

8.    Hang drywall.

9.    Help a friend install a toilet (and ejector pump) and a pedestal sink in basement.

10.  Assemble various pieces of furniture.

11.  Install replacement ceiling light fixtures.

12.  Change outlets and switches.

13.  Install ceiling fans.

14.  Install mini blinds.

When something needs to be fixed, installed, or updated, I am usually the one to do it.  I will look at some DIY blogs, YouTube videos, ask friends, and even ask employees of Lowes.  As my blog title states, I pretty much do whatever I can do to save paying someone else. 

This weekend I installed a timer switch for my bathroom exhaust fan.  Maybe someone else needs to know how to do this.  One would think the instructions in the box would suffice, but they really don’t.

1.  Turn off the power to the switch at the breaker box.  This is usually done by trial and error because I have never seen an electrical panel that is properly marked.  Why don’t they color code them or number them somehow in both locations?

2.   Remove the switch plate.  Mine happens to have an outlet next to it because when we bought this house there was no exhaust fan in this bathroom.  So I had the installer add an outlet too.

3.   Remove the two screws holding the switch in.  Gently pull out the switch.

 

4.   Unscrew each screw that is holding in the wire.  There should be one on the top and one on the bottom.  If it is an older switch, the wires could be hooked around the screw.  Remove and straighten the wire.  Set switch aside.

5.   On the timer switch, unscrew the two screws so the spaces are open to receive the wires.   Then insert the top wire into the top space and tighten the screw.  Do the same for the bottom wire.

  

6.   Gently press the timer switch into the electrical box and insert top and bottom screw.

7.   Check your face plate and be sure it is in the right place horizontally.  If not, unscrew, press it to the center, and tighten the screws.

 

8.   Reinstall the face plate over the timer switch.

9.   Place the timer guide on post then the thumb switch.

10. Turn the dial, then flip the circuit breaker on.

11. The fan should turn on.

I always feel better when I can do something to improve myself and my home.